Network Video Record, NVR

Starting the System

1. Connect the power cable of the recorder to the wall outlet.

2. You will see the initialization screen.

The initialization process will last about 2 minute. If a new HDD is installed, the initialization process may take longer.

Installation Wizard

As shown below, proceed through each step of the <installation wizard>.

Install Wizard can only be accessed at factory reset. If you do not want to proceed, click <exit>.

￭ It will automatically change to the optimal monitor resolution and run the install wizard.

￭ If the install wizard does not run, remove the monitor connection from the back of the recorder, reboot the recorder and reconnect the monitor.

1. In the <language> screen, select the language and press the <next> button.